How To Make Boxing Gloves

DIY Boxing Gloves

If you can't afford a new pair of boxing gloves, but have a pair of wraps, you can easily make DIY boxing gloves using the wraps and a pair of flip flops.

Steps To Make Boxing Gloves:

  1. Get a pair of wraps or make a pair using an old t-shirt.
  2. Get an old pair of flip flops - buy a cheap pair for $1 if you don't have any.
  3. Place each flip flop on the back of your hand and wrap it to your hand with your wrap all the way from your wrist to your fingers.
Good luck making it and hope you enjoy! If you have any questions feel free to ask them in the comments below.

More Detailed Instructions:

This project is one of many projects in my Fighter DIY eBook. The eBook contains complete detailed and fully illustrated instructions that you can follow with ease. Download it today!

Related Video:

Comments

Post a Comment

Popular This Month:

How To Make a Free-Standing Punching Bag

Image
10-Step Instructions: Get 13 pool noodles (for a 6 foot tall punching bag), a roll of cheap packing tape and a roll of cheap cling wrap (or two). For your pole get a one inch wide PVC pipe - roughly 6 foot long. For your platform get an MDF (particle) board at least 2 foot wide and 1/2 inch thick. Alternatively if you don't want to make the base, you can simply use an umbrella base such as this one from Amazon:  https://amzn.to/3nY3J19 . For mounting your pole, get a one inch galvanised steel pipe roughly one foot long and a flange to mount it. You'll also need 4 thick, short screws to fix the flange onto your board - these are ideal: https://amzn.to/3gCO82H . Note, if you want to make your punching bag more rigid, use a two foot galvanised pipe. For fixing your PVC pipe onto your galvanised pipe you will also need a one inch hose clamp. Setup your platform and pole: screw the flange onto one end of your board; insert the galvanised pipe into one end of the PVC pipe and lock
Read more

How To Make a Boxing Cobra Punching Bag Using the Kewlus Spring

Image
Intro Make your own Cobra Punching Bag at home that is faster than some of the top brands on the market at just a fraction of the cost. To make it super easy I designed and produced a custom spring specifically for this purpose. I made it so that you can simply screw it onto a 3/4 inch galvanised steel pipe. If you have any questions please put them in the comments below and I'll respond as soon as I can. Also please share your thoughts and experience with others here if you make one. Items You'll Need: Kewlus Spring (KS9) - purchase here:  https://kewlus.com/products/kewlus-spring-v1 Base pipe: galvanised  3/4 inch pipe  (1.05 inches outer diameter) the length of roughly half your height. I used a 3 foot long pipe for my height (I'm 6ft tall). The 3/4 inch pipe has an outer diameter that is 1.05 inches. The spring is designed to fit perfectly onto this pipe. You can also combine sections of pipe using a coupling , for example 2ft section and 1ft section to allow reduction
Read more